Put the empty bottle into the conveyor belt, wait until the cone after a good buckle, then manually put the handle, the machine will handle the pressure into the bottleneck, so as to achieve the purpose of automatic assembly.

Main technical characteristics
(1) The machine uses the 8-degree segmentation device (Taiwan Tanzi) drive station, a total of six stations: feeding; buckle cone; buckle handle; handle into the press; take cone; Feeding from the upstream production line.
(2) The machine uses the Japanese SMC pneumatic components; Panasonic servo motor and drive; electrical use of PLC control, text display and operation. Electrical components using brand products, quality assurance. The whole structure is compact and reasonable, covers an area of less, low energy consumption, economical and practical.

This machine process and action description
Feeding: will be brought into the upstream with the docking production line, for automatic feeding.
Buckle cone: empty bottle into the turntable, and go to cone cone position, the cone action will be automatically carried out.
On the handle: When the empty bottle to the manual operation, the handle will be fastened to the cone.
Press-in: When the station is turned into the cylinder position, the press-in action will take place.
Take the cone: When the station to this point, the cone will be automatically removed.
Discharge: When the station to this point, cone will be automatically sent.

Production speed of 20 / min 
The use of power three-phase 380V, 50HZ 
Negative pressure -0.05 ~ -0.10 Mpa 
Compressed air 0.5 ~ 0.7Mpa 
Machine Dimensions L × B × H; 3840 * 2300 * 1920 (mm) 
Machine weight ≈ 1000Kg